Checking firewood moisture is more useful than judging logs only by their colour, weight or cracked ends. A suitable moisture meter can help you assess a sample, provided you follow its instructions and understand where the reading is taken.

This guide explains the questions a homeowner should ask about the process. It does not replace your stove manual, fuel supplier’s advice or the safe use instructions for any tool.
Checking firewood moisture: practical checklist
Checking firewood moisture is most useful when you follow the meter instructions and test representative logs from the supply you intend to burn. Keep a note of the readings and storage conditions rather than judging the whole delivery from one surface. Checking firewood moisture should sit alongside choosing suitable fuel and following the stove manufacturer’s guidance.
Know the fuel specification first
Read the manual for the exact wood-burning stove. It should identify suitable fuel and any moisture guidance. Keep this information with your fuel delivery records rather than relying on an informal rule remembered from another appliance.
HETAS consumer guidance identifies Ready to Burn logs and briquettes as having a moisture content of 20% or less. That is a useful fuel reference, while the specific appliance instructions still determine what you should use.
Choose a meter intended for the job
Check that the meter is suitable for wood and read how it should be set up. Different meters can have different scales, settings and limitations. Do not treat a reading from an unidentified mode as a reliable fuel measurement.
Make sure the instrument is in usable condition and follow its checks and battery guidance. If you are unsure how to interpret the scale, ask the supplier or meter manufacturer before deciding that a delivery is ready.
Understand why the reading location matters
A log’s outside surface can give a different impression from its interior. Woodsure’s sampling guidance describes testing freshly split log faces and taking a representative selection. This helps explain why one convenient surface reading cannot describe an entire delivery.
Obtain a suitable fresh split sample safely; ask your supplier for help if necessary. This article is not an instruction to use an axe or other splitting equipment without the relevant skill and precautions. Follow the meter’s directions for contact and measurement.
Sample more than the easiest log to reach
A single piece from the top of a pile may not represent the rest. Choose a small selection from different accessible parts of the batch without destabilising a stack or climbing into a container. If safe access is difficult, ask the supplier how to obtain a useful sample.
- Keep batches from different deliveries identifiable.
- Record the date and the meter setting used.
- Note which part of the batch was sampled.
- Take more than one reading where the instructions recommend it.
- Investigate unexpectedly different results rather than ignoring them.
Retain the notes as practical ownership records. They are not a substitute for a supplier’s certification or a laboratory assessment.
Interpret results alongside storage conditions
If readings suggest the fuel is not suitable for use, keep it separate and contact the supplier for advice. Do not mix the batch into ready fuel and hope the difference will disappear. Check whether the storage arrangement has allowed rain to reach the logs or moisture to remain trapped.
A covered store should still be practical to inspect and use. Identify which batch you intend to use next, and keep indoor working supplies away from the appliance as its instructions require.
Do not turn the result into a universal burning instruction
A moisture reading is one part of fuel selection. It does not confirm that painted, treated or otherwise unsuitable wood can be burned. Use only fuel approved for the actual stove and follow its operating instructions.
If performance changes or you are concerned about smoke, deposits or unfamiliar operation, seek appropriate advice. Do not compensate for questionable fuel by experimenting with appliance settings outside the manual.
Can I test just the outside of a log?
That can be misleading. Use the appropriate sample preparation and measurement method described by the meter and relevant fuel guidance.
Does one low reading approve the whole delivery?
No. Treat the batch as a sampling question and discuss inconsistent results with the supplier.
Should I keep a record?
A brief dated note helps you compare batches and explain a question to the supplier, especially if storage conditions change.
For help choosing a stove and understanding its ownership routine, contact Blue Oak Fireplaces or visit the Syston showroom.